We're happy you're here. You can use the Community to catch up on all the latest updates, discuss features, exchange experiences and tips, share your thoughts with other smart people. Your Pilot Journey Starts Here.
  3. I cannot get the camera recognized by a Mac or a PC when connecting?

I cannot get the camera recognized by a Mac or a PC when connecting?

Topic created · 3 Posts · 41 Views
  • 1

    Hello everyone,

    When you connect the camera to the Mac,

    please firstly make sure the camera is turned on.

    Secondly, Connecting a Mac to Pilot requires third-party tool: OpenMTP or Android File Transfer, link to download below:

    https://files.labpano.com/app/pilot/Document/5.18.0_111_0/One/PilotOne_doc_en.html#mac

    Thirdly, please use a U-green type-C port Hub as the adaptor and connect it to the Mac, below the image. and please still use the original usb-c cable to connect the camera to the hub.

    how to connect the camera to the macbook.jpg

    last, please make sure that the camera is turned on.

    For windows PC, please directly connect the camera to the windows with the included type-C cable in the package. If you encountered the failed connect, please you can connect a usb-c type-C hub as an adaptor to connect the camera and the pc.

    Hopefully, the information is helpful.

    Best regards

    0
  • J

    OpenMTP or Android File Transfer may not work properly via Pilot. That's why errors occur. In order to fix this you need to restore the data. Do raid data recovery and restart with the drivers for the camera. U-green type-C port Hub will work through the old adapter. Or you need signal boosters for version 3.1 and higher. You can use a non-native cord to connect via an adapter or adaptor. Try again, you will be fine.

    0
  • P

    I had a similar problem on windows, but after installing the drivers, the problem just disappeared and the device was able to connect successfully. Check if everything is connected correctly.

    0
Log in to reply